Cam indexers are more and more widely used in automation equipment. Although similar products are emerging in endlessly, such as DD motors, servo motors, hollow rotating platforms, etc., from the perspective of actual use, the cost, heavy load, In terms of high speed and stability, the advantages of the indexer itself are beyond those of other products. Then, in the high-speed
cam indexer, as a brand indexer, where are the advantages it has?
High-speed indexer literally means faster speed. Regardless of the input shaft and output shaft of the indexer, the rotation speed is faster than usual. In general, we set the rotation time of the input shaft to less than 1 second. The situation will be attributed to the high-speed indexer. The rotation speed of the input shaft determines the speed of the indexer in the overall operation. Due to the requirements of various industries and the different processing methods, the output rotation time and residence time are also different. The movement time also determines the quality and stability of the indexer.
Everyone knows that the indexer has a self-locking function. This feature of it comes from the special structure of the input cam. It is this feature that makes the static stop of the indexer more advantageous than other similar products. In this case, the input shaft rotates at a high speed, even with a fast rhythm, the indexer is still relatively stable in operation. What we call stability means that the indexer itself will not vibrate due to transmission. Because the indexing action of the input cam determines, the larger the contact area between the smooth cam and the needle bearing, the higher the transmission stability, so we say that the larger the drive angle, the more stable the operation of the indexer.
For the high-speed indexer, the quality of the cam determines the performance of the indexer. On the one hand, the material used by the cam itself, the wear resistance of the material and the smoothness of the material itself, make the indexer move smoothly in the transmission process; on the other hand It is the quality of processing, which is what we call the use of processing equipment and processing program settings. Under normal circumstances, the tool head of the imported horizontal machining center rotates 360 degrees, so for complex cam curves, it can achieve full For azimuth machining and cutting, we say that the core component of the indexer is the cam of the indexer, which is the reason.
When the input shaft of the indexer rotates at a high speed, as long as the speed is less than 1 second or faster, in some conventional
indexers, a lot of vibration will occur, which will have a great impact on the accuracy of the product and the processing quality. In the above two situations analyzed, the brand indexer is only known for its high speed and stability, because its own processing technology determines its quality. I believe that through the above analysis, we can give you guidance and help in the selection of high-speed cam indexers.
TAG:
