DT series cam indexer
This series of models can withstand super large axial load and vertical radial pressure. The convex fixed disk surface and large-aperture hollow shaft at the output end can be matched with dynamic and static automatic peripheral settings. The hollow hole can pass through water, electricity, oil, Gas pipelines are widely used in heavy-duty automation equipment.
Product Details
|
DT series specifications |
Details |
|
Distance between out and in shaft/mm |
80 |
110 |
140 |
180 |
210 |
250 |
350 |
438 |
|
Diameter of output shaft φ(mm) |
30 |
40 |
50 |
60 |
115 |
80 |
125 |
220 |
|
Number of divisions (number of stations) |
2,3,4,5,6,8,10,12,15,16,20,24,30,32，36，40，48，60，72 |
|
Drive angle (deg) |
90°,120°,150°,180°,210°,240°,270°,300°,310°,330°,360° |
|
Input shaft speed (rpm) |
0-300 (determined according to customer needs) |
Technical Parameters
|
Item |
Sym-bol |
Unit |
Distance between out and in axis |
|
80DT |
110DT |
140DT |
180DT |
210DT |
250DT |
350DT |
|
Allowable thrust load on output shaft |
C1 |
kgf |
520 |
860 |
1050 |
1500 |
1950 |
2500 |
4500 |
|
Allowable radial load on output shaft |
C2 |
kgf |
220 |
420 |
720 |
1100 |
1520 |
1800 |
3300 |
|
Allowable torque on output shaft |
Ts |
kgf-m |
Refer torque table |
|
Allowable thrust load on input shaft |
C3 |
kgf |
220 |
300 |
500 |
1200 |
1570 |
1900 |
2800 |
|
Max. repetitive bending force on input shaft |
C4 |
kgf |
160 |
250 |
350 |
960 |
1130 |
2250 |
3800 |
|
Max. repetitive torque on input shaft |
C5 |
kgf-m |
9.5 |
25 |
53 |
220 |
460 |
670 |
1000 |
|
GD2 of input shaft (Note1) |
C6 |
kgf-m2 |
0.03 |
0.01 |
0.07 |
0.23 |
0.62 |
0.86 |
2.7 |
|
Indexing accuracy |
|
sec. |
±30 |
±30 |
±30 |
±30 |
±30 |
±30 |
±30 |
|
Weight |
|
kg |
20 |
50 |
85 |
190 |
450 |
500 |
1200 |
